8 Nonstick Pan Mistakes, From Plunging a Hot Pan Into Cold Water to Scraping With Metal Spatulas

The nonstick skillet is usually the first pan pulled out on a busy morning. It handles scrambled eggs, pancakes and grilled cheese without a fight, and when the coating is new, almost nothing clings to it.

That slick surface is also the most fragile thing in the cabinet. Sur La Table’s guide to cleaning and caring for nonstick cookware lays out a set of habits that wear the coating down or bend the pan itself, and 8 of them come up again and again, from plunging a hot pan into cold water to scraping it with metal spatulas. With Thanksgiving cooking set for November 26, here is what cookware and appliance makers say to stop doing.

A fried egg cooking in a dark frying pan
Horacio Cambeiro – CC BY-SA 3.0/Wikimedia Commons

1. Plunging a Hot Pan Into Cold Water

The most common mistake happens in the first minute after cooking. A pan comes off the burner, the sink is right there, and the faucet goes on. Sur La Table says to always let a nonstick pan cool completely before cleaning it, because immersing a hot pan in cold water can cause it to warp.

A warped pan does not sit flat on the cooktop. The retailer notes that warping leads to uneven cooking, a wobbly pan on the burner and possible damage to the coating. Setting the pan on a cool burner or trivet for a few minutes avoids all of it.

2. Scrubbing With Steel Wool or Abrasive Pads

Burned-on cheese invites a heavy-duty scrubber, but Sur La Table says abrasive scrubbers and steel wool scratch and damage the coating. The retailer recommends a soft sponge or cloth for daily washing and a non-abrasive nylon brush or nonstick-safe sponge for tougher residue.

Scratches matter because they spread. According to the guide, a scratch exposes the metal underneath, food starts to stick in those spots, and the pan gradually loses the very quality that made it worth buying. Home cooks looking for gentler cleanup ideas can find more in this list of clever kitchen tricks for home cooks.

3. Reaching for Harsh Detergents

Strong, grease-cutting cleaners seem like a shortcut. Sur La Table says harsh detergents wear the nonstick surface down over time, which is why its guide sticks to mild dish soap and warm water.

The coating itself is thin. Wikipedia’s entry on non-stick surfaces explains that most pans are made by spraying or rolling between one and seven layers of polytetrafluoroethylene, better known by the brand name Teflon, onto a roughened metal base. More layers generally mean a sturdier pan, but any of them can be worn away by aggressive cleaning.

4. Loading It Into the Dishwasher

Some nonstick pans carry a dishwasher-safe label, and that is where many households stop reading. Sur La Table still says hand washing is best, because the high heat and harsh detergents inside a dishwasher can shorten the life of the pan.

Whirlpool goes further. Its guide to what is and is not dishwasher safe says nonstick cookware should never go in the dishwasher, since the combination of water, heat and detergent can damage or remove nonstick coatings. A separate rundown of everyday kitchen items that should never go in a dishwasher covers several other pans and tools that belong in the sink instead, and a dishwasher that still runs plenty of loads benefits from this guide on how to clean a dishwasher.

Blintzes browning in a frying pan on the stove
Andrevan – CC BY-SA 2.5/Wikimedia Commons

5. Using Oven Cleaner on a Stubborn Spot

Oven cleaner is built to dissolve baked-on grease, and that strength is exactly the problem. Sur La Table’s instruction is short: never use oven cleaners or other harsh chemicals on nonstick pans.

A soak in warm, soapy water, followed by the soft sponge, is the method the retailer points to for stuck-on food.

6. Cranking the Burner to High

A screaming-hot pan sears a steak well, but nonstick is not built for that job. Sur La Table says high heat can damage the coating and recommends cooking on low to medium settings.

Wikipedia notes that any coating of this type rapidly loses its nonstick properties if overheated and that manufacturers typically recommend keeping temperatures below about 500°F. That is one reason many cooks keep a cast iron skillet on hand for searing. Lodge, the cast iron maker, has its own very different rules in its cleaning instructions, including no soaking and no dishwasher, so each pan gets the job it handles best. For the holiday crunch, some households also move side dishes off the stovetop entirely, as in this comparison of ways to free up the oven this Thanksgiving.

7. Scraping With Metal Spatulas and Forks

A metal spatula is fast and familiar, but Sur La Table says to avoid metal utensils on nonstick because they scratch the surface. The retailer recommends wood, silicone or plastic tools instead.

Wikipedia’s entry makes the same point in plain terms: utensils harder than the coating can scratch it, and switching to non-metal tools avoids that. A crowded stovetop adds its own hazards on a holiday, and a separate checklist names 5 things never to leave within 3 feet of the stove.

8. Stacking Pans Without Protection

The last mistake happens after the dishes are done. Stacking pans inside each other saves cabinet space, but the bottom of one pan grinds against the cooking surface of the next. Sur La Table says to store pans in a way that avoids scratches and, if they must be stacked, to place a layer of paper towel or a pan protector between each one.

A Pan Built on a Lab Accident

The material behind all of these warnings has an unusual history. According to the Science History Institute, chemist Roy Plunkett discovered the substance later sold as Teflon by accident at DuPont in 1938, and when he received the Scott Medal in 1951, every guest went home with a muffin tin coated in it. Its profile of Plunkett traces how the discovery moved from the lab into the kitchen.

Wikipedia adds that a French engineer began coating his fishing gear with the material, his wife Colette suggested trying it on her cooking pans, a French patent followed in 1954, and the Tefal company was formed in 1956 to make nonstick pans. Seventy years later, the advice for keeping one working is mostly about what not to do: let it cool, wash it gently by hand, keep the heat moderate, use soft tools and give it a little padding in the cabinet.

This article was produced with AI assistance and edited for accuracy against the sources linked above.

Image: Diamond diamond diamond – CC BY-SA 4.0/Wikimedia Commons

Author

More Posts You May love

Leave a Reply

Your email address will not be published. Required fields are marked *