The cookie dough is mixed, the oven is hot, and the recipe calls for baking powder. The little can in the pantry turns out to be empty, and the only white powder left is a box of baking soda. Every home baker has stood in that spot at least once.
The two ingredients look alike, but they are not equal. Arm & Hammer says baking soda is about 3 to 4 times as strong as baking powder, which is why swapping them takes some math. This guide pulls together what Arm & Hammer, Illinois Extension, North Dakota State University Extension and King Arthur Baking say about the difference and the swaps most often suggested: 3 teaspoons of baking powder for each teaspoon of baking soda, or a mix of baking soda and cream of tartar when baking powder runs out.

Why Baking Soda Is So Much Stronger
Baking soda is pure sodium bicarbonate. Arm & Hammer describes it as a fast-acting leavener: as soon as it meets moisture and an acidic ingredient such as honey, buttermilk, molasses, brown sugar or cocoa, it releases carbon dioxide bubbles that lift the batter. Illinois Extension, in a post published Dec. 6, 2024, adds that more baking soda does not mean a bigger rise, and too much without enough acid can leave a metallic taste.
That strength explains the small amounts in recipes. Arm & Hammer says recipes typically call for about 1/4 teaspoon of baking soda per 1 cup of flour. A North Dakota State University Extension column by Julie Garden-Robinson, published Dec. 12, 2013, puts the contrast at four times the leavening power and warns that a heaping teaspoon can lead to heavy cakes or bitter, soapy-tasting cookies. The column is older, but the chemistry it describes matches the newer guides, and a baker who measures carefully can stretch a pantry further, as these clever frugal living tips suggest.
What Baking Powder Brings to the Bowl
Baking powder is a blend. Arm & Hammer says it combines baking soda with one or more acids and a stabilizer such as cornstarch, so the acid is already built in. King Arthur Baking adds that most store-bought versions are double-acting, reacting once when mixed with liquid and again in the oven heat. Wikipedia’s entry on baking powder describes it as a dry chemical leavening agent made from a carbonate or bicarbonate plus a weak acid.
Because it carries its own acid, baking powder is the usual pick for recipes without sour ingredients. Arm & Hammer lists cakes, pancakes and biscuits as good matches, while baking soda tends to show up in cookies and muffins. A pantry shelf that keeps both leaveners clearly labeled, much like the checks in this list of things to check in the kitchen before Thanksgiving dinner, saves a lot of mid-recipe confusion, and this list of items not worth buying at the grocery store is a reminder that basics like these two are worth keeping fresh.
Swap One: 3 Teaspoons of Baking Powder
When a recipe wants baking soda and none is on hand, Illinois Extension says baking powder can be tried at triple the amount. King Arthur gives the same ratio: for 1 teaspoon of baking soda, use 3 teaspoons of baking powder. Arm & Hammer’s conversion chart lists the same swap and notes that no extra acid is needed.
There is a catch. King Arthur warns that using that much baking powder may leave a slightly bitter, off-putting taste. The NDSU column is blunter, saying baking powder cannot simply replace baking soda in a recipe. Recipes built around acidic ingredients like buttermilk or brown sugar may also taste different, since the soda was there partly to balance that acid. Home cooks who like to plan around substitutions can find more pantry workarounds in these clever kitchen tricks for home cooks, and holiday bakers short on oven space can look at this air fryer and toaster oven comparison.
Swap Two: Baking Soda With Cream of Tartar
Going the other direction takes a mix. For each 1 teaspoon of baking powder, Illinois Extension, King Arthur and Arm & Hammer all point to 1/4 teaspoon of baking soda plus 1/2 teaspoon of cream of tartar. Arm & Hammer calls it the best direct substitute. King Arthur adds 1/4 teaspoon of cornstarch or tapioca starch to its version of the mix.
The reason it works is simple. Cream of tartar is the dry acid that baking powder normally contains, so adding it to baking soda recreates the blend. Wikipedia’s page on potassium bitartrate covers the ingredient that goes by the name cream of tartar.

Swap Three: Lemon Juice or Vinegar
A pantry without cream of tartar has another option. King Arthur says 1/4 teaspoon of baking soda plus 1/2 teaspoon of lemon juice or white vinegar can stand in for 1 teaspoon of baking powder. Arm & Hammer’s chart gives the same pairing with 1 teaspoon of acid and notes that it may slightly alter the taste. The two guides differ on the amount of acid, so a small test batch is the safer route.
Timing matters with any of these swaps. Baking soda reacts as soon as it meets liquid and acid, so King Arthur and Arm & Hammer both advise getting the batter into the oven right away. A batter left on the counter loses its bubbles before it ever bakes.
Limits Worth Remembering
The sources describe these as emergency fixes. Illinois Extension says the swaps will not be perfect and that a trip to the store or a neighbor may be the better option. King Arthur says the substitutes step in and do a good job, but will not perform exactly like the original leavener.
One more detail from King Arthur: Dutch-process cocoa does not contain enough acidity to activate baking soda, so a recipe built on it may need baking powder instead. Freshness counts too, and King Arthur advises checking expiration dates and reading labels before measuring. The sources here span 2013 to 2024, and the ratios stay consistent across them, so the guidance holds as a kitchen reference rather than news.
This article was produced with AI assistance and edited for accuracy against the sources linked above.
Image: Tszrkx – Public domain/Wikimedia Commons